The Cost Effective Replacement for Schedule 10.

Realizing the growing need of fire protection systems in commercial and residential construction, Bull Moose Tube has added Eddy Flow to its comprehensive line of sprinkler pipe products.

Eddy Flow is a specially engineered replacement for Schedule 10, offering better flow characteristics while providing design flexibility. This product is FM Approved, as well as UL Listed (for U.S. and Canada) for roll grooved, welded, and plain-end applications. Please check with appropriate sources for up-to-date listings and approval information.
Sprinkler Pipe
Ultra Eddy
Eddylite
Eddythread 40
Eddy Flow
Schedule 10 and 40
FAQs
Capacity Charts
US Specifications
Metric Specifications
 

As an added benefit, it is more economical to use than schedule 10 due to reduced delivery costs and ease of handling. Furthermore, Eddy Flow's larger ID provides an opportunity for downsizing and further cost savings.
 
 
 
INSIDE DIAMETER
    C.R.R.*
NPS(in)
O.D.(in)
Eddy Flow(in)
Eddy Flow
1 1/4
1.660
1.530
1.98
1 1/2
1.900
1.728
3.44
2
2.375
2.203
2.78
2 1/2
2.875
2.705
1.66
3 3.500 3.334 1.00
4 4.500 4.310 1.00

*Corrosion Resistance Ratio
 
 
• Dual Certified to ASTM A135 and A795.
• FM Approved for roll grooved, welded, and plain-end application in wet systems.
• UL listed (for U.S. and Canada) for joining by welding or by listed rubber gasketed fittings for use in wet, dry, preaction, and deluge type sprinkler systems.
• UL Listed (for US and Canada) and FM Approved for use with Victaulic® FIT® Fittings.
• Has a pressure rating of 300 psi.
• Lightweight - saves shipping costs, offers easier handling.
• Floor stock available in various lengths produced in Casa Grande (AZ), Gerald (MO), and Masury (OH). Also can be ordered in custom lengths.
• Can be supplied roll grooved or plain end.
• Can be used for wet and dry systems.*
 

* Eddy Flow can be hot dipped galvanized to meet FM's requirement for dry systems

For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's instructions for the specific fitting used.

All information contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligations.

For additional information, contact your salesperson today at 800.325.4467 or 636.537.2600 in the U.S.A., or from Canada call 800.882.4666.
 
 
2006 All rights reserved.