| |
NPS (in) |
1 |
1 1/4 |
1 1/2 |
2 |
2 1/2 |
3 |
4 |
| |
O.D. (mm) |
33.40 |
42.16 |
48.26 |
60.33 |
73.03 |
88.90 |
114.30 |
| |
 |
Wall
(mm) |
1.65 |
1.65 |
1.65 |
1.65 |
|
|
|
| I.D.
(mm) |
30.51 |
39.27 |
45.36 |
57.43 |
|
|
|
|
Empty Weight
(lbs/ft)
|
1.29 |
1.65 |
1.90 |
2.39 |
|
|
|
|
Water-Filled
(lbs/ft)
|
2.02 |
2.86 |
3.51 |
4.98 |
|
|
|
| C.R.R. |
2.17 |
1.39 |
1.11 |
0.90 |
|
|
|
| |
 |
Wall
(mm) |
|
2.11 |
2.41 |
2.41 |
2.11 |
2.29 |
2.57 |
| I.D.
(mm) |
|
38.48 |
44.04 |
56.11 |
69.32 |
84.89 |
109.63 |
|
Empty Weight
(lbs/ft)
|
|
2.08 |
2.73 |
3.45 |
3.68 |
4.88 |
7.07 |
|
Water-Filled
(lbs/ft)
|
|
3.24 |
4.25 |
5.92 |
7.46 |
10.54 |
16.50 |
| C.R.R. |
|
2.93 |
3.44 |
2.78 |
1.09 |
1.00 |
1.00 |
| |
 |
Wall
(mm) |
2.77 |
2.77 |
2.77 |
2.77 |
3.05 |
3.05 |
3.05 |
| I.D.
(mm) |
27.86 |
36.63 |
42.72 |
54.79 |
66.93 |
82.80 |
108.20 |
|
Empty Weight
(lbs/ft)
|
2.09 |
2.69 |
3.10 |
3.93 |
5.25 |
6.45 |
8.36 |
|
Water-Filled
(lbs/ft)
|
2.70 |
3.74 |
4.54 |
6.28 |
8.77 |
11.83 |
17.55 |
| C.R.R. |
NA |
NA |
NA |
NA |
NA |
NA |
NA |
| |
 |
Wall
(mm) |
3.02 |
3.02 |
3.10 |
3.10 |
|
|
|
| I.D.
(mm) |
27.76 |
36.53 |
42.47 |
54.53 |
|
|
|
|
Empty Weight
(lbs/ft)
|
2.26 |
2.91 |
3.45 |
4.37 |
|
|
|
|
Water-Filled
(lbs/ft)
|
2.87 |
3.96 |
4.86 |
6.70 |
|
|
|
| C.R.R. |
0.74 |
0.48 |
0.47 |
0.38 |
|
|
|
| |
 |
Wall
(mm) |
3.20 |
3.33 |
3.45 |
3.58 |
|
|
|
| I.D.
(mm) |
27.69 |
36.20 |
42.04 |
53.95 |
|
|
|
|
Empty Weight
(lbs/ft)
|
2.38 |
3.18 |
3.81 |
5.01 |
|
|
|
|
Water-Filled
(lbs/ft)
|
2.98 |
4.21 |
5.20 |
7.29 |
|
|
|
| C.R.R. |
1.00 |
1.00 |
1.00 |
1.00 |
|
|
|
| |
 |
Wall
(mm) |
3.38 |
3.56 |
3.68 |
3.91 |
5.16 |
5.49 |
6.02 |
| I.D.
(mm) |
26.64 |
35.05 |
40.89 |
52.50 |
62.69 |
77.93 |
102.3 |
|
Empty Weight
(lbs/ft)
|
2.50 |
3.38 |
4.04 |
5.44 |
8.62 |
11.27 |
16.06 |
|
Water-Filled
(lbs/ft)
|
3.06 |
4.35 |
5.36 |
7.60 |
11.71 |
16.04 |
24.27 |
| C.R.R. |
1.00 |
1.00 |
1.00 |
1.00 |
1.00 |
1.00 |
1.00 |
| |
|
*All Weights are Normal
**Schedule 40 in 2-1/2", 3", and 4" NPS available FOB Casa Grande, AZ only
N/A: Non Applicable |
|
For
proper operation, all pipe surfaces should be cleaned prior to installation.
In order to provide a leak-tight seat for the gasket, pipe surfaces
should be free from indentations and projections from the end of
the pipe to the groove. All loose paint, scale, dirt, chips, grease,
and rust must be removed prior to installation. Failure to take
these important steps may result in improper coupling assembly,
causing leakage. Also, check the manufacturer's instructions for
the specific fitting used. |
