Eddylite
Eddylite
The Superior Lightwall Threadable!
Bull Moose Tube Eddylite is a lightwall threadable pipe manufactured in NPS 1" through 2". Eddylite is a truly unique product within the fire protection industry. This product has been engineered to provide lower cost fire protection systems without compromising service life, adequate wall thickness, or standard outside diameter.
Eddylite is manufactured to meet the requirements of ASTM A135 and A795 specifications. This pipe product has been fully approved by Factory Mutual, and listed by Underwriters Laboratories (for U.S. and Canada) for use in fire protection systems with a working pressure of 300 psi or less.
CORROSION RESISTANCE RATIOS
| Nominal Pipe Size (in) |
Standard O.D. (in) |
Inside Diameter (in) |
UL, CUL Threaded |
Bundle Size |
|---|---|---|---|---|
| 1 | 1.315 | 1.137 | 0.13 | 91 | 1 1/4 | 1.660 | 1.482 | 0.08 | 61 | 1 1/2 | 1.900 | 1.712 | 0.12 | 61 | 2 | 2.375 | 2.177 | 0.16 | 37 |
BENEFITS
- Standard outside diameter, unlike some other lightwall threadable pipe products
- Lighter in weight than schedule 40
- Superior burst strength and corrosion resistance ratio compared to other lightwall threadable pipe products
- Exceptionally strong, meets or exceeds ASTM A135 minimum yield requirements
- Can be used with standard couplings, fittings, and valves
- Freight savings
- Lower sprinkler system costs without compromising service life
- Better hydraulics than schedule 40
- Wall thickness and weight close to schedule 30; compare to other lightwall threadable products with wall thickness less than schedule 10
- All Sprinkler Pipe products are protected with Eddy Guard II
PIPE PREPARATION
For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's instructions for the specific fitting used.
All information contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligations.
For additional information, contact your salesperson today at 800.325.4467 or 636.537.2600 in the U.S.A., or from Canada call 800.882.4666.
Downloads
Filesize: 115 Kb
Posted: 03.09.2008
Filesize: 82 Kb
Posted: 04.09.2008